Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

Calculate conversion coefficients for a PWM output

Issue

Calculate conversion coefficients for a PWM output

Environment

I/NET Resident I/O Editor

PWM output

Cause

The key fact to remember is that the counts (in the built in calculator) are no longer counts but "ticks" or .01 seconds. The second key fact is that the A/D converter has NOTHING to do with this process. It only applies to voltage or current outputs, not pulsed outputs.

Resolution

If your minimum pulse is a tenth of a second you would enter counts low as 10. Full pulse is 5.2 seconds, 520 for counts high.

Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
2 weeks ago
Updated by: