Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversion coefficient for an internal PI point

Issue

What are the correct conversion coefficients for an internal PI point?

Environment

I/NET Resident Point editor

Cause

Internal PI points are always the target of a calculated point.

Resolution

Internal PI points must use a conversion coefficient pair:

  • M = 1.0
  • b = 0.0
Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
‎2018-09-06 03:31 PM
Updated by: