Knowledge Base
Showing results for 
Search instead for 
Did you mean: 

For Belimo Tri-State motors with ASCs


The Actuator is responding as though it is receiving a continuous signal from the ASC.


  • I/NET software all versions
  • I/NET ASC controllers


The triac device on these ASCs have a bleed voltage value even though the signal is in the Off mode. Thus causing the motor to drive to one end of the stroke and stop.


See Tech Tip No. G075 which describes a procedure to correct this issue.

Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
‎2018-09-10 05:12 AM
Updated by: