Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

Getting an IDisc Wand to work after an upgrade from I/NET 2.XX to I/NET Seven

Issue

Getting an IDisc Wand to work after an upgrade from I/NET 2.XX to I/NET Seven

Environment

I/NET Seven

IDisc

Cause

Getting an IDisc Wand to work after an upgrade from I/NET 2.XX to I/NET Seven

Resolution

  1. Go to I/O Server and look at the Peripherals Section, Select the correct type of reader (IDisc) and the COM Port (Com 1 or 2) for communications.
  2. Go to Access, Options, select the supply card number from reader and check this box. It will probably be grayed out.
  3. Read a card or IDisc and see what happens. If it is set up correctly it will work, if not recheck the settings.
  4. Verify that the Individual Option is set for Individual as the selection.
Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
3 weeks ago
Updated by: