Knowledge Base
Showing results for 
Search instead for 
Did you mean: 

Host Lost Message Definition


Host Lost Message Definition




Host Lost messages are caused when I/NET has lost communication over the Ethernet LAN with a host workstation, Xenta 527 or NPR.


Host masks are enabled or disabled by using the far left bit mask of group 1. 

You can enable/disable these from showing up in AMT by:

  1. Open AMT
  2. Select Edit>Configuration
  3. Toggle the far left bit of Group 1
  4. Click OK


Alternative Resolution

  1. Open I/NET configuration
  2. Modify the Active Profile
  3. Click Host Masks
  4. Modify Each Host Device
  5. Toggle the far left bit of Group 1
Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
‎2018-09-10 04:51 AM
Updated by: