Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

How to Take a Controller to boot from the I/NET Host workstation

Issue

How to Take a Controller to boot from the I/NET Host workstation

Environment

I/NET

PCU DCU

Cause

Performing a station restore or bin file restore fails.

Resolution

  1. In I/NET Select Edit>Host Computer>Software Restore
  2. Select the Controller you wish to take to boot
  3. Select the checkbox marked "Software"
  4. Click OK
  5. When the software download reaches 10% of the total size click Cancel
  6. You can verify the controller is in boot by attempting to connect to it, or by using netcon
  7. Repeat steps 1-4 to allow the bin file to completely load before using the controller
  8. Make sure you do a station restore to the controller after the "Boot" process
Tags (2)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
‎2018-09-06 12:28 PM
Updated by: