Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

How to monitor if a manual switch in an I/O module for a Xenta server is set to something other than auto.

Issue

  • How to monitor if an HOA switch in an I/O module for a Xenta Server is set to something other than auto.

  • How to tell if an I/O signal is hardware (HW) overridden/forced

Environment

Xenta Server (731, 721, 711, 701)

Cause

Some I/O modules have switches that can be used to manually force/override the outputs.

It could be important to know what signals are forced.

Resolution

In XBuilder, each physical I/O that has a manual switch also has a signal for it.

 

 

This can be used to monitor the switch.

Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
2 weeks ago
Updated by: