Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

Lan Tap Overflow

Issue

Lan Tap Overflow message received in AMT

Environment

All versions of I/NET Software

Cause

The message capacity of a LAN Tap has been exceeded and they are now being FI/FO (First In, First Out) mode, meaning that the first message that came in will be the first one that goes out. When this happens, the LAN Tap Overflow message is displayed in AMT.

Resolution

To resolve this issue, verify the following:

  1. Open up AMT and look at the Messages and see if there are any controller that having issues
  2. Verify that address and correspond that with the Host or Link Tap that it is coming from.
  3. Rectify the issue, whether it is communications or power and the error should go away.
Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
‎2018-09-06 01:17 PM
Updated by: