Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

Logs in the UNC are not archiving to the Enterprise Server

Issue

Logs in the UNC are not archiving to the Enterprise Server

Environment

I/A Series R2

Universal Network Controller (UNC) and Enterprise Server

Cause

The UNC station and the Enterprise Server station have their LogService 'archiveMode' property set to 'archive_disabled'. 

Resolution

Change the LogService 'archiveMode' in both the UNC station and the Enterprise Server station. 

1. Set the UNC station's LogService 'archiveMode' to 'archive_remote'. The 'archiveAddress' property should have 'Supervisor' checked. 
2. 
Set the Enterprise Server station's LogService 'archiveMode' to 'archive_local'. (The “archive_local” selection is valid only if the station is running the DatabaseService)

The following have to be also correct in order for log archiving to happen:

  • AddressBook entries should be properly setup in the Enterprise Server and UNC stations. Refer to Page 1-15 and 1-16 of the Niagara Standard Programming Reference for further information. 
  • Supervisor checkbox in the UNC's LogService 'archiveAddress' property should be checked.
  • In the Niagara Log Object properties, the 'archiveSetup' property should have 'nearFull' or 'daily' checked. It is recommended that both of these be checked. 
Tags (1)
Labels (1)
No ratings
Version history
Revision #:
1 of 1
Last update:
‎2018-09-06 10:28 AM
Updated by: