Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

PCC10 / PCLTA20 Lon Talk adapter configuration for WorkPlace Tech

Issue

What application type is required to allow a PCC10/PCLTA20  LonTalk adapter to be used with WorkPlace Tech?

Environment

WorkPlace Tech Tool software

Echelon LonTalk adapter (PCC10 / PCLTA20) 

This information does not apply to the USB U10 Echelon LonTalk adapter

Cause

Selection of the incorrect LonTalk driver application will result in the inability of the WorkPlace Tech software to access the connected LON network.

Resolution

Change the NI application of the LonTalk adapter

  1. Open the Windows Control Panel
  2. Select the LonWorks Plug N' Play.
  3. Change the NI Application
    1. For a PCC-10 LTA select NSIPCC
    2. For a PCLTA-20 LTA select NSIPCLTA
  4. Click Apply
  5. Click OK to exit the program.
Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
3 weeks ago
Updated by: