Knowledge Base
Showing results for 
Search instead for 
Did you mean: 

STR602 terminal detail


Insufficient information for the STR602 terminal detail / assignment




The installation instructions does not give insufficient information regarding the connections of a STR602 sensor.


The STR602 combines the RPW4425 and DRT3453 into one temperature and setpoint unit. The STR602 is a 3 wire device using a common 0V between the setpoint adjust potentiometer and the temperature sensing negative co-efficient thermistor.

The terminations are:

STR602 term 22 (Setpoint)

STR602 term 23 (Temp 'C)

STR602 term 24 (0Vcom) - this is the common of both the temperature sensor and the setpoint potentiometer.

Setpoint Resistance (for BAS/Sigma use Lookup table 1, for SmartStruxure use the Satchwell thermistor )

Sensor Resistance  (for BAS/Sigma use Lookup table 1, for SmartStruxure use the Satchwell thermistor )

Tags (1)
Labels (1)
No ratings
Version history
Revision #:
1 of 1
Last update:
‎2018-09-11 01:01 AM
Updated by: