Advice on the configuration of a Sigma UNC 632, UNC 696 or UNC 796 controller, when connecting it to a "Flat" Ethernet network.
All Sigma controllers connected to flat ethernet network.
A "Flat" Ethernet network is a network that does not contain any subnets, for instance a network who's address is 10.158.0.0 Mask 255.255.0.0 will contain network addresses 10.158.0.1 to 10.158.255.254.
On this type of network the Sigma device will only require an IP address and Subnet Mask to be entered.
This information and details of the controllers "Default Server" are added to the controller using the SDCU (Sigma Device Configuration Utility).