Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

Temperature inputs not reading the correct value

Issue

Temperature inputs not reading the correct values

Environment

  • Cyberstation
  • IOUs
  • Controller

Cause

Bad input

Bad controller

Bad sensor

Resolution

Replace sensor with a 10k ohm resistor.  Temperature input should read roughly 77°F or 25°C.  If it does then the problem is with the sensor.  If it does not then the problem is either with the input board or that particular input itself.

Tags (1)
Labels (2)
Version history
Revision #:
1 of 1
Last update:
2 weeks ago
Updated by: