Knowledge Base
cancel
Showing results for 
Search instead for 
Did you mean: 

Termination resistor values

Issue

What value resistors should be used as termination resistors?

Environment

I/NET site

Cause

What value resistors should be used as termination resistors?

Resolution

On a controller LAN, use 100 to 120 ohm resistors.

If a repeater is installed, or controllers are being installed on a subLAN, use 620 ohm resistors.

Tags (1)
Labels (1)
Version history
Revision #:
1 of 1
Last update:
3 weeks ago
Updated by: