Knowledge Base
Showing results for 
Search instead for 
Did you mean: 

Using RAM to monitor multiple input interfaces from one RAM engine


How to setup RAM to monitor multiple systems from one RAM Engine





Remote Alarm Manager


There are some instances where a site has multiple system. These can all be monitored from a single RAM Engine interface where the alarm actions are carried out.


In the first instance you need to install and configure the RAM engine on the chosen master system. How this is done is detailed in the engineering guide that gets installed with RAM.

In the example attached Sigma is the main system. Two remote BAS2800+ systems are also monitored with alarm actions setup on the Sigma master system.

RAM also supports Micronet and Vista. These will be tested in due course and this article will be updated to include the setup.

Tags (1)
Version history
Revision #:
1 of 1
Last update:
‎2018-09-10 12:11 PM
Updated by: